Loading... Please wait...
  • Image 1

Bungee Pulls for Single AR Mag Pouch


Product Description

Set of 3: Includes pulls and wire.

The mag pulls are designed to fit our new single mag http://www.tinytactical.com/tt-single-ar-mag-pouch/. You will need to drill two .2 - .25mm holes in the mag pouch top edge and then a single .2 - .25mm pilot hole followed by a .4mm drill through the mag pull parts to allow the wire to pass through them. Once the holes are drilled you can weave the wire through them.

Note: They are hard to drill and assemble as the parts are very small.



Recent Updates